C.
install the
Remove and
freestanding
bath
If the freestanding bath needs removing, please follow
the steps below:
Lift the bath levelly, then the guide pin could be
pluged out of the guide bush. Then remove the nut
on the drain tail pipe.
1)
C.
1)
-5-
*
*
2
Mequiars
28
(
)
(
)
Cleaning and Care
Cleaning Acrylic Surfaces: Do not use abrasive
cleansers on any acrylic surfaces, as they will scratch
and dull the surface. Wipe out the bath after each use
to prevent a build-up of soap and scum.
If the acrylic surface becomes dull, an automotive type
rubbing compound may be used on the unit, followed
by an application of paste wax.
We recommend:
Rubbing compound mequiars mirror glaze 28 metal
polish (import product)
reen oil.
*
*
G
IMPORTANT CONSUMER INFORMATION
2) When installing the freestanding bath, please first
apply lubricating oil both to the inner surface of the
guide bush and the outer surface of the guide pin,
and then insert the guide into the guide bush.
2)
Nut of the Drain Tail Pipe
1119528-T01-C
