Product Information
Applicable product:
Integral apron, left drain
K-1209-LA
Integral apron, right drain
K-1209-RA
Fixture*:
Bathing well:
Basin area, bottom
47
″
(119.4 cm) x 20
″
(50.8 cm)
Basin area, top
53
″
(134.6 cm) x 23
″
(58.4 cm)
Weight
100 lbs (45.4 kg)
To overflow:
Water depth
14-1/2
″
(36.8 cm)
Capacity
64 gal (242.3 L)
* Approximate measurements for comparison only.
Pump:
V
Hz
A
1-speed
120
60
7.5
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24
″
(61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
48 lbs/square foot (234 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
No change in measurements if connected with drain
illustrated. (K-7161-AF or K-7161M-AF)
3"
(7.6 cm)
20"
(50.8 cm)
8-11/16" (22.1 cm)
1-11/16"
(4.3 cm)
60" (152.4 cm)
3"
(7.6 cm)
1" (2.5 cm)
32" (81.3 cm)
16"
(40.6 cm)
1-1/2" OD
1-1/4"
(3.2 cm)
1/2" (1.3 cm)
R. Max
Integral
Flange Detail
2-7/8"
(7.3 cm)
Recommended Faucet Area
1013796-1-B
2
Kohler Co.
