12. Install the Client Chair (If Used)
Insert a dowel (supplied) into each of the four holes in the platform.
With help, lift the chair onto the platform.
Align the holes in the chair legs with each of the dowels.
Lower the chair legs onto the dowels.
13. Cleaning the Cast Iron Surface
When cleaning up after installation,
do not use abrasive cleansers
, as they may scratch and dull the
footbath surface. Use warm water and a liquid detergent to clean the surface.
Remove stubborn stains, paint, or tar with turpentine or paint thinner.
Do not allow cleaners
containing petroleum distillates to remain in contact with any footbath surfaces for long periods
of time.
Remove plaster by carefully scraping with a wood edge. Do not use metal scrapers, wire
brushes, or other metal tools. Use a powder-type detergent on a damp cloth to provide mild
abrasive action to any residual plaster.
Refer to the Maintenance Guide for additional cleaning information.
1/2" (1.3 cm)
Dowel
Pump Access Panel
1063564-2-D
14
Kohler Co.
Summary of Contents for K-1006
Page 1: ...Installation Guide Pedicure Spa K 163 K 1006 K 1011 K 1012 1063564 2 D...
Page 17: ...1063564 2 D...
Page 18: ...1063564 2 D...
Page 19: ...1063564 2 D...
