Product Information
Applicable product:
Drop-in rim style, custom pump
K-1112-CB
Fixture*:
Bathing well:
Basin area, bottom
43
″
(109.2 cm) x 20-1/2
″
(52.1 cm)
Basin area, top
53-1/2
″
(135.9 cm) x 32-1/8
″
(81.6 cm)
Weight
110 lbs (50 kg)
To overflow:
Water depth
15
″
(38.1 cm)
Capacity
57 gal (215.9 L)
* Approximate measurements for comparison only.
Drop-in cut-out dimensions:
58-1/2
″
(148.6 cm) x 40-1/2
″
(102.9 cm)
Pump:
V
Hz
A
1-speed
120
60
7.5
Minimum access panel pump/control:
20
″
(50.8 cm) W x 15
″
(38.1 cm) H
required
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24
″
(61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
35 lbs/square foot (171 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
10-13/16" (27.5 cm)
60" (152.4 cm)
3/8" (1 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
Pump/Control Access
Recommended faucet area
1-1/2" OD
42" (106.7 cm)
No change in measurements if connected with drain
illustrated. (K-11677 or K-11677M)
1-1/2"
(3.8 cm)
Drop-In Rim
Detail
1-1/2"
(3.8 cm)
19-1/2"
(49.5 cm)
3-1/2"
(8.9 cm)
3-1/8"
(7.9 cm)
21"
(53.3 cm)
1047164-1-D
2
Kohler Co.
