Product Information
Applicable product:
Drop-in rim style
K-1114
shown
Drop-in, 4-side integral
flange
K-1114-F
not shown
Drop-in cut-out dimensions:
70-1/2
″
(179.1 cm) x 40-1/2
″
(102.9 cm)
Fixture*:
basin area
top area
weight
Bathing well
55
″
(139.7 cm) x
23-1/4
″
(59.1
cm)
64
″
(162.6 cm) x
32
″
(81.3 cm)
132 lbs
(60 kg)
water depth
capacity
To overflow
15
″
(38.1 cm)
78.5 gal (297 L)
* Approximate measurements for comparison only.
Pump:
Hp
V
Hz
A
1-speed
1.25
120
60
7.5
Minimum access panel pump/control:
20
″
(50.8 cm) W x 15
″
(38.1 cm) H
required
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24
″
(61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of 80
lbs./square foot (390 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to ANSI Standard Z124.1. All dimensions are
nominal.
72" (182.9 cm)
42" (106.7 cm)
1-1/2" OD
3/8" (1 cm)
21"
(53.3 cm)
3-1/2"
(8.9 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
Recommended faucet area
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
19-1/2"
(49.5 cm)
1-1/2"
(3.8 cm)
Drop-In Rim
Detail
1-1/4"
(3.2 cm)
Tile Flange
Detail
1-1/2"
(3.8 cm)
Pump/Control Access
11-1/16" (28.1 cm)
3-3/4"
(9.5 cm)
1047185-1-B
2
Kohler Co.
