Product Information
Applicable product:
Integral apron, left drain
K-1122-GLA
Integral apron, right drain
K-1122-GRA
Fixture*:
Bathing well:
Basin area bottom
45-1/8
″
(114.6 cm) x 19-11/16
″
(50 cm)
Basin area top
52-3/4
″
(134 cm) x 25-5/16
″
(64.3 cm)
Weight
100 lbs (45.4 kg)
To overflow:
Water depth
15
″
(38.1 cm)
Capacity
58 gal (219.5 L)
* Approximate measurements for comparison only.
Blower motor:
Heater
V
Hz
A
300 W
120
60
5
Required accessories:
Clearflo slotted overflow brass bath
drain
or
K-7271
Clearflo slotted overflow bath drain –
PVC pipe
K-7272
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor:
120 V, 15 A, 60 Hz
Blower motor is supplied with a 24
″
(61 cm) grounding-type
plug-in cord.
Notes
Install this product according to the installation guide.
Floor support under product must provide for a minimum of
46 lbs/square foot (223 kg/square meter) loading.
The hot water supply should be 70% of capacity or greater.
Installations will vary.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions are
nominal.
1/2" (1.3 cm) R.
1-1/2"
Bath Drain
60" (152.4 cm)
3/4" (1.9 cm)
19"
(48.3 cm)
32"
(81.3 cm)
2-1/2"
(6.4 cm)
16"
(40.6 cm)
11-1/4"
(28.6 cm)
Integral Flange
Detail
1-1/4"
(3.2 cm)
No change in measurements if connected with
drain illustrated. (K-7272)
1-1/4"
(3.2 cm)
4-1/8"
(10.5 cm)
1064185-1-D
2
Kohler Co.
