Product Information
Applicable product:
Integral apron, left drain
K-1124-GLA
Integral apron, right drain
K-1124-GRA
Fixture*:
Bathing well:
Basin area bottom
51-3/8
″
(130.5 cm) x 21
″
(53.3 cm)
Basin area top
64-1/2
″
(163.8 cm) x 30-1/2
″
(77.5 cm)
Weight
115 lbs (52.1 kg)
To overflow:
Water depth
15
″
(38.1 cm)
Capacity
72 gal (273 L)
* Approximate measurements for comparison only.
Blower motor:
Heater
V
Hz
A
300 W
120
60
5
Required accessories:
Clearflo slotted overflow brass bath
drain
or
K-7271
Clearflo slotted overflow bath drain –
PVC pipe
K-7272
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Blower motor:
120 V, 15 A, 60 Hz
Blower motor is supplied with a 24
″
(61 cm) grounding-type
plug-in cord.
Notes
Install this product according to the installation guide.
Floor support under product must provide for a minimum of
42 lbs/square foot (201 kg/square meter) loading.
The hot water supply should be 70% of capacity or greater.
Installations will vary.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions are
nominal.
36" (91.4 cm)
72" (182.9 cm)
1-1/2"
Bath Drain
1/2" (1.3 cm) R.
3/4" (1.9 cm)
11-1/4"
(28.6 cm)
18"
(45.7 cm)
2-1/2"
(6.4 cm)
No change in measurements if connected
with drain illustrated. (K-7272)
19"
(48.3 cm)
Integral Flange
Detail
1-1/4"
(3.2 cm)
4-1/8"
(10.5 cm)
1-1/4"
(3.2 cm)
1064191-1-D
2
Kohler Co.
