Product Information
Applicable product:
Drop-in rim style, custom pump, with heater
K-1201-HB
Fixture*:
Bathing well:
Basin area, bottom
42
″
(1067 mm) x 17
″
(432 mm)
Basin area, top
55
″
(1397 mm) x 25
″
(635 mm)
Weight
98 lbs (44.5 kg)
To overflow:
Water depth
12-1/8
″
(308 mm)
Capacity
50 gal (189.3 L)
* Approximate measurements for comparison only.
Drop-in cut-out
58-1/2
″
(1486 mm) x 28-1/2
″
(724 mm)
V
Hz
A
Pump: 1-speed
120
60
7.5
Heater: 1 kW
120
60
12.5
Minimum access panel
pump/control (required):
20
″
(508 mm) W x
15
″
(381 mm) H
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
120 V, 15 A, 60 Hz
Heater
120 V, 15 A, 60 Hz
Locate the outlets behind the whirlpool and within 24
″
(610
mm) of the pump and heater.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
44 lbs/square foot (211 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
No change in measurements if connected with drain
illustrated. (K-7161-AF or K-7161M-AF)
Pump/Control Access
20" (508 mm) W x
15" (381 mm) H
30" (762 mm)
1-1/2"
(38 mm)
Ø 1-1/2"
17"
(432 mm)
8-1/2" (216 mm)
15"
(381 mm)
1-1/2"
(38 mm)
2-3/4"
(70 mm)
3" (76 mm)
2-7/8"
(73 mm)
60" (1524 mm)
7-1/2"
(191 mm) Max
3/16" (5 mm)
1013696-1-D
2
Kohler Co.
