User Keypad
NOTE:
The illustration of the user keypad differs slightly from the user keypad equipped with your
model. Backjet Mode and Neckjet Mode are not equipped with your model.
Power
Turns the whirlpool pump on and off. Icons illuminated in blue indicate available
modes/features. Modes which are operating will be illuminated in green.
Outer Ring
Rotate the outer ring to the desired mode. The selected mode will flash blue.
OK
Activates the desired mode.
Flexjet Flow
Mode
When illuminated, the adjustable jet water flow can be adjusted by pressing the up or
down arrow.
Up Arrow
Increases the water flow when the Flexjet flow mode is active. Increases the pulse speed
when the neckjet or backjet mode is active.
Indicator Bar
Displays the water flow volume in the Flexjet flow mode. Displays the pulse speed in the
neckjet or backjet mode.
Effervescence
Mode
Ports activate to provide a gentle, soothing bubbling action. The Flexjet mode, backjets,
and neckjets will automatically turn off when this mode is activated.
Down Arrow
Decreases the water flow when the Flexjet flow mode is active. Decreases the pulse speed
when the neckjet or backjet mode is active.
Chromatherapy
Cycle
Chromatherapy lights will automatically and continuously cycle through the eight colors:
white, violet, indigo blue, aqua blue, green, yellow, orange, and red. One cycle through all
eight colors takes approximately one minute.
Heater
Automatically engages when the power icon is selected. Rotate the outer ring until the
heater mode is flashing, then press OK to turn the heater off. Press OK again to turn the
heater back on.
Chromatherapy
Specific Color
Selection
When selected, press
″
OK
″
to activate and use the up or down arrow to reach the desired
color. Press
″
OK
″
while the chromatherapy cycle is active to turn off the chromatherapy
lights.
Activates Mode
Selected
Indicator Bar - Shows water
flow volume or pulse rate
Turn the jet trim
clockwise to
decrease the flow.
Turn the jet trim
counterclockwise to
increase the flow.
Power On/Off
Neckjet Mode -
Adjust Pulse
Backjet Mode -
Adjust Pulse
Chromatherapy -
Specific Color
Rotate outer
ring to access
desired mode.
Chromatherapy Cycle
Heater On/Off
Lighted User Keypad
Decreases Flow or Pulse
Effervescence Mode
Increases Flow or Pulse
Flexjet Flow Mode
1023234-5-C
4
Kohler Co.
