Product Information
Applicable product:
Drop-in bath with airjets and chromatherapy
K-1418-GCR
Fixture*:
Bathing well:
Basin area, bottom
48
″
(121.9 cm) x 27
″
(68.6 cm)
Basin area, top
60
″
(152.4 cm) x 30
″
(76.2 cm)
Weight
150 lbs (68 kg)
To overflow:
Water depth
16
″
(40.6 cm)
Capacity
94 gal (355.8 L)
* Approximate measurements for comparison only.
Drop-in cut-out
70-1/2
″
(179.1 cm) x 40-1/2
″
(102.9 cm)
Blower motor/control:
Heater
V
Hz
A
300 W
220-240 V
50/60
3
Recommended accessories:
Adjustable pop-up drain – above or
through-the-floor installation
K-7161-AF
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current
Device (RCD):
Blower motor/control:
220-240 V, 15 A, 50/60 Hz
Notes
Install this product according to the installation guide.
Floor support under bath must provide for a minimum of 46 lbs
(223 kg) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
This bath is designed for drop-in installation only. It is not suited
for use in a three-wall alcove with an overhead shower.
A blower motor/control access panel is required.
Fixture dimensions are nominal and conform to tolerances in ANSI
Standard Z124.1.2.
42" (106.7 cm)
72" (182.9 cm)
3" (7.6 cm)
1-1/2" OD
Blower Motor/Control Access
34" (86.4 cm) W x
15" (38.1 cm) H
20-1/8"
(51.1 cm)
22"
(55.9 cm)
5-1/4" (13.3 cm)
36" (91.4 cm)
11-3/4"
(29.8 cm)
No change in measurements with drain
shown. (K-7161-AF or K-7161M-AF)
K-1418-GCR
1-1/16" (2.7 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
1035473-1-F
2
Kohler Co.
