-3-
1072927-T01-A
•
Use non abrasive soap and water when possible.
•
Avoid harsh chemicals and disinfectants.
•
Do not use acetone or alcohol.
•
Do not use solvent based cleaners.
•
Always read the label instructions on any cleaning
product before applying it to an acrylic surface.
•
Wipe out the receptor after each use to prevent a
build-up of soap and scum.
6. Apply a bead of Silicone sealant
to full length at the top and sides
of Receptor to seal the joint
between wall and Receptor.
7. Install Shower Doors. Follow the
instructions suppied with the
Door pack.
When cleaning-up after installation,do not use abrasive
cleaners as they may scratch and dull the surface. Use
warm water and liquid, non abrasive detergent to clean
the surface.
Stubborn stains, paint or tar can be removed with white
spirit. Do not use cleaners containig petroleum
distilates.
Plaster can be removed by scraping with a soft wood
edge. Do not use metal scrapers. wire brushes, or
other metal tools.
White
Spirit
6.
7.
•
•
•
•
•
•
CLEAN-UP AFTER INSTALLATION
CLEANING & MAINTENANCE INSTRUCTIONS
