1460955-T01-A
-5-
G.
从水槽下面装上纤维垫圈、支撑环和装配环到水槽法兰，用螺
丝固定。注意：螺丝无需装紧。（参看图
3G
）
H.
将卡箍装入法兰的卡槽内。（参看图
3H
）
I. 用螺丝刀将三个螺钉锁紧。视需要去除多余的腻子。
（参看图
3I
）
G. Re-assemble the Fiber Gasket, Backup Flange and Mount-
ing Ring and Screws. DO NOT overtighten. (see Figure 3G).
H. Pull the Snap Ring open and press firmly into the groove on
the flange
.
(see Figure 3H).
I. Tighten all tree Screws evenly and firmly against the Backup
Flange. trim off excess sealant in sink. (see Figure 3I).
3G
3H
3I
下方
下方
下方
