1021992-2-
A
6
Kohler Co.
Countertop
Sealant
Sink
Fastener
Mounting
Bracket
5. Apply the Sealant
-
Clean all residue from the top rim of the sink.
-
Clean the underside of the countertop around the cut-out area and
make sure the surface is smooth and free of defects.
-
Apply a generous bead of silicone or latex sealant to the rim of the
sink near the inside edge.
6. Finish the Installation
-
Position and align the sink with the opening in the countertop. The
corner of the sink should be flush with the inside edge of the
countertop.
-
Rotate the mounting brackets over the sink rim.
-
Tighten each bracket until snug while maintaining proper alignment.
-
Wipe away any excess sealant with a dry cloth.
-
Allow the sealant to cure for a minimum of 30 minutes. Follow the
instructions provided with the sealant.
-
Connect the drain fitting and faucet supply fittings.
-
Turn on the water and check for leaks at all connections.
-
Tighten any connections that leak.
Summary of Contents for K-3387
Page 7: ...1021992 2 A 7 Kohler Co ...
