Kohler Co.
7
1226975-X2-B
B. Place an 800 x 800 mm cushion on the floor, take out the toilet from the carton then put the
toilet on it.
Installation
A. To Remove Existing Toilet
Turn off the water supply. Flush the toilet, and use a sponge to remove the remaining water from the tank and
bowl. Disconnect the supply shut-off valve (if present), and remove the old tank and bowl.
Remove old gasket from the floor and closet flange with a putty knife. Remove old T-bolts and discard them.
NOTICE:
if a new toilet is not installed immediately, temporarily stuff a rag in the closet floor flange.
Closet Floor Flange
Preparations Before Installation (cont.)
