2. Install the Seat
1456686-X2-A
2
Kohler Co.
1. Install the Mounting Plate
Position the Seat
Slide the seat onto the mounting plate until you feel it snap into plate.
Check the positioning of the seat. Adjust the position if needed.
Adjust the Seat
To adjust the seat position, remove the seat by pressing in the release button and sliding the
seat forward.
Reposition the mounting plate as needed.
Install the Seat
Securely tighten the mounting plate bolts and nuts.
Slide the seat onto the mounting plate until you feel it snap into plate.
Position the mounting plate over the mounting holes on the bowl.
Position the washers to rest in the openings of the mounting plate.
Insert each bolt through the mounting plate and into the mounting holes.
NOTE:
The nut should not be threaded onto the bolt. It will not tighten by threading it into place.
While holding the bolts in place, push a nut up onto each bolt as far as possible.
Bolt
Mounting Plate
Washer
Nut
Release
Button
Mounting
Plate
Summary of Contents for K-5724K
