2. Install the Handshower
From the top of the bath or finished deck, insert the smaller end
of the interlock hose down into the hose guide and through the
mounting hole.
From the underside of the bath or finished deck, insert one
washer into the flexible hose. Thread the flexible hose into the
high pressure hose.
Insert one washer into the other end of the high pressure hose.
Connect the high pressure hose onto a vacuum breaker (if
installed), or onto the appropriate water source.
Run cold and hot water through the handshower hose to flush
out dirt and debris. Check for leaks.
Turn the cold and hot water supply off.
For an elbow installation:
Insert one washer into the bottom of
the elbow assembly. Thread the bottom of the elbow assembly
onto the interlock hose. Insert a screen washer into the top of the
elbow assembly. Thread the handshower onto the elbow
assembly.
To avoid kinking, be sure to remove any twist loops in the hose.
3. Installation Checkout
Complete the installation of the valve, valve trim and any other
components according to the instructions packed with the
product.
High-pressure
Hose
Handshower
Elbow Assembly
Washer
Decorative Hose
Machine End
Washer
Kohler Co.
5
113936-2-BB
