Product Information
With neck jets
K-772-N1
shown
Without neck jets
K-772-N1
not shown
Required accessories:
Jet trim kit
K-9696
Fixture*:
basin area
top area
weight
Bathing
well
42
″
(106.7 cm) x
26
″
(66 cm)
54
″
(137.2 cm) x
32
″
(81.3 cm)
460 lbs
(208.7
kg)
water depth
capacity
To
overflow
15
″
(38.1 cm)
70 gal (265 L)
* Approximate measurements for comparison only.
Product
Pump
Heater
V
A*
Neckjets
2 hp
1.5 kW
240
15
w/o
Neckjets
1.5 hp
1.5 kW
240
11
* Approximate measurements for comparison only.
Drop-in cut-out
58-1/2
″
(148.6 cm) x 40-1/2
″
(102.9 cm)
Included Components:
Cutout template
K-583 template
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage
Circuit-Breaker (ELCB):
Pump/control
208-240 V, 20 A, 50/60 Hz
Locate the outlet behind the whirlpool and within 24
″
(61 cm) of the pump.
Installation Notes
Install this product according to the installation guide.
Cast iron whirlpools are extremely heavy, making some drop-in
installations difficult. Splitting the deck/surround is recommended
if installing into a deck.
Floor support under whirlpool must provide for a minimum of
1500 lbs (680.4 kg).
Hot water supply should be 70% of capacity or greater.
Installations will vary.
Fixture conforms to ASME Standard A112.19.1M. All dimensions
are nominal.
K-772-N1
42" (106.7 cm)
60" (152.4 cm)
3" (7.6 cm)
8-7/8"
(22.5 cm)
21"
(53.3 cm)
1-7/8"
(4.8 cm)
3-1/4"
(8.3 cm)
2-7/8" (7.3 cm) 1/4" (6 mm)
3/4"
(1.9 cm)
20-3/8"
(51.8 cm)
1-1/2" OD
Pump/Control Access
34" (86.4 cm) W x 15" (38.1 cm) H
No change in measurements if connected with drain
illustrated. (K-7161-AF or K-7161M-AF)
1019470-1-C
2
Kohler Co.
