Product Information
With neck jets
K-812-N1
shown
Without neck jets
K-812-H2
not shown
Required accessories:
Jet trim kit
K-9696
Grip rails (pair)
K-9616
Fixture*:
basin area
top area
weight
Bathing
well
47
″
(119.4 cm) x
24
″
(61 cm)
67
″
(170.2 cm) x
29
″
(73.7 cm)
435 lbs
(197.3
kg)
water depth
capacity
To
overflow
12-7/8
″
(32.7 cm)
52 gal (196.8 L)
* Approximate measurements for comparison only.
Product
Pump
Heater
V
A*
Neckjets
2 hp
1.5 kW
240
15
w/o
Neckjets
1.5 hp
1.5 kW
240
11
* Approximate measurements for comparison only.
Drop-in cut-out
70-1/2
″
(179.1 cm) x 34-1/2
″
(87.6 cm)
Cut-out for undermount
K-581 template
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage
Circuit-Breaker (ELCB):
Pump/control
208-240 V, 20 A, 50/60 Hz
Locate the outlet behind the whirlpool and within 24
″
(61 cm) of the pump.
Installation Notes
Install this product according to the installation guide.
Cast iron whirlpools are extremely heavy, making some drop-in
installations difficult. Splitting the deck/surround is recommended
if installing into a deck.
Floor support under whirlpool must provide for a minimum of
1500 lbs (680.4 kg).
Fixture conforms to ASME Standard A112.19.1M. All dimensions
are nominal.
K-812-N1
36" (91.4 cm)
72" (182.9 cm)
3" (7.6 cm)
9" (22.9 cm)
18"
(45.7 cm)
2"
(5.1 cm)
3-1/4"
(8.3 cm)
2-7/8" (7.3 cm) 1/4" (6 mm)
3/4"
(1.9 cm)
18-1/4"
(46.4 cm)
1-1/2" OD
Pump/Control Access
34" (86.4 cm) W x 15" (38.1 cm) H
No change in measurements if connected with drain
illustrated. (K-7161-AF or K-7161M-AF)
1019460-1-C
2
Kohler Co.
