Operation (cont.)
NOTE:
To activate or deactivate functions while the neckjets are operating, rotate the outer ring until the
desired function is flashing and press
″
OK.
″
Backjets
Rotate the outer ring until the backjet icon is flashing and press OK. The backjet pulsing action will
start at medium speed. The backjets pulse from the bottom of the whirlpool toward the top, with
water flow and pulse action occurring from two backjets at a time.
NOTE:
If the water level falls below the water level sensors, the backjets will stop. The backjet icon and
indicator bar on the user keypad will flash. The backjets will automatically restart when the water level
covers the sensors.
To increase or decrease the backjet pulsing action, press either the up or down arrow buttons on the
keypad, while the backjet mode is active.
To increase or decrease the flow volume to the backjets, rotate the outer ring to the Flexjet mode,
press OK to activate the mode, and press either the up or down arrows on the keypad. This also
increases or decreases the flow to all modes.
Press OK while the backjet mode is active, to turn off the backjets.
Kohler Co.
7
1023274-5-C
Summary of Contents for K-856-M
Page 65: ...1023274 5 C ...
Page 66: ...1023274 5 C ...
Page 67: ...1023274 5 C ...
Page 68: ...USA Canada 1 800 4KOHLER México 001 800 456 4537 kohler com 2009 Kohler Co 1023274 5 C ...
