PRODUCT NOTICES
A.
(GFCI)
(ELCB)
A. Installation Hazard Notification
DANGER: Risk of fire, electric shock, or injury to
persons.
WARNING: Risk of electrical shock.
WARNING: Risk of electrical shock.
WARNING: Risk of electrical shock.
WARNING: Risk of injury or property damage.
CAUTION: Risk of product damage.
NOTICE:
Read important safety instructions on inside
front cover of these instructions.
A licensed
electrician should make all electrical connections.
Connect only to
a circuit protected by a Ground-Fault Circuit-Interrupter
(GFCI) or Earth-Leakage Circuit-Breaker (ELCB).
Disconnect
power before servicing.
Please read all instructions thoroughly before beginning
installation, including the following Product
Requirements.
Do not lift the
bath with airjets by the air channels or blower
motor, or use the air channels or blower motor for
structural support of the bath.
Follow all local plumbing and electrical codes.
B. Factory-Assembled Features
Factory installed components include water pump, air
pump and control box and so on. No installation is
needed.
Do not relocate the whirlpool pump and air
pump, or make other modifications to the whirlpool
system, as this could adversely affect the performance
and safe operation of the whirlpool. Kohler
. shall not
be liable under its warranty or otherwise for personal
injury or damage caused by any such unauthorized
modification.
WARNING: Unauthorized modification may cause
unsafe operation and poor performance of the
whirlpool.
Co
B.
-2-
C. Electrical Connection
The installation must have a 30mA Earth Leakage
Circuit Breaker. The GFCI protects against Line-to-
Ground shock hazard. Use a 220-240V, 10A
(minimum), 50Hz dedicated service for the whirlpool.
C.
30mA
GFCI
220-240
/50
10
1206725-T01-A
