52
EN
Control panel (optional)
The partly completed machinery can be equipped with a control panel shown in the following figure.
D
C
A
B
1. Turn the key
A
to ON to supply power and turn on the ATS45 control unit
D
.
2. Turn the key
A
to START to start the engine.
3. Turn the key
A
to OFF to stop the engine.
4. Turn selector
B
to select the automatic engine speed control.
5. To adjust the engine speed, use buttons
C
.
Caution
• For any information about the control panel, please refer to the "control panel use instructions” that can be downloaded from the
website http://valdinoci.it.
Important
• The control panel can also be remotely connected to the engine by means of an extension cable. Upon request, 3, 5 or 10 m
long extension cables can be supplied.
Important
• Upon request, 3, 5 or 10 m long extension cables can be supplied for the gas control potentiometer.
CONTROL PANEL
Summary of Contents for KDI 3404 TCR
