4
INFORMATION
ABOUT USE
EN
36
4.5
Oil filling
Important
•
For safety precautions see
•
Before proceeding with operation, read
1.
Loosen the oil filler cap A.
2.
Add the type oil recommended (
4.1
3.
Before checking oil engine needs to be level.
4.
Remove the oil dipstick B and check that the level is up
to but does not exceed the MAX.
5.
If level is not at the MAX. level, add additional oil.
6.
Re-tighten the cap A.
Important
•
Do not use the engine with the oil level below the
minimum.
4.2
NOTE
: Click on the right to play the procedure.
https://www.youtube.com/embed/
HWCzK41Br1U?rel=0
4.6
Coolant filling
Important
•
Before
proceeding with
operation, read
NOTE: Refer to the
technical
documentation of the
vehicle.
Warning
•
An anti-freeze protection liquid (ANTIFREEZE) - mixed with
decalcified water - must be used.
•
The freezing point of the refrigerant mixture depends on the amount
concentration in water.
•
As well as lowering the freezing point, the antifreeze also raises the
boiling point.
•
A 50% mixture is recommended to ensure a general level at
protection prevents the formation of rust, galvanic currents and
calcium deposits (
4.7
AdBlue filling
NOTE: Refer to the technical documentation of the vehicle.
Summary of Contents for KDI 3404TCR-SCR
