Mariposa
®
72" x 36" drop-in BubbleMassage
™
air bath
K-1257-G
Lumbar
Angle 42°
1-1/2"
(38 mm)
36" (914 mm)
72" (1829 mm)
1"
(25 mm)
3"
(76 mm)
1-1/2"
Bath Drain
2-7/8"
(73 mm)
Drop-In Rim Detail
No change in measurements if connected
with drain shown. (K-7166-AF)
Recommended Faucet Location
18"
(457mm)
1-13/16"
(46 mm)
10-1/4"
(260 mm)
Blower Access
20" (508 mm) W x
15" (381 mm) H
20"
(508 mm)
3-1/2"
(89 mm)
1-1/2"
(38 mm)
Required Electrical Service
One dedicated circuit required, protected with Class A Ground-
Fault Circuit-Interrupter (GFCI). Outside North America, this
device may be known as a Residual Current Device (RCD).
Blower:
120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
Installation:
Drop-in
Drain location:
End
Basin area, bottom:
50" x 24" (1270 mm x 610 mm)
Basin area, top:
65" x 27" (1651 mm x 686 mm)
Weight:
102 lbs (46.3 kg)
Minimum floor load:
41 lbs/ft² (200.2 kg/m²)
Water depth:
14" (356 mm)
Water capacity:
72 gal (272.5 L)
Cutout:
Drop-in, 70" x 34" (1778 mm x 864 mm)
Electrical component
rating:
Blower: 120 V, 10 A, 60 Hz
Notes
Measure your actual product for rough-in
details.
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Remote blower installation kit K-1446 is
available for relocating the blower. Provide
access for servicing the blower.
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
If installing a rim-mount faucet, make sure there
is no interference above or below the deck
before drilling any holes.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to
.
5-29-2021 15:08 - US/MX
