1-1/2" Bath Drain
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
240 V, 15 A, 50/60 Hz
Blower:
Technical Information
All product dimensions are nominal.
If installing a rim-mount faucet, make sure there
is no interference with drain overflow before
Drop-in
Installation:
Center
Drain location:
drilling any holes. Consult local and national
48" x 27" (1219 mm x 686 mm)
Basin area, bottom:
codes for minimum air gap requirements if
installing a spout on the faucet deck.
60" x 30" (1524 mm x 762 mm)
Basin area, top:
150 lbs (68 kg)
Weight:
If relocating the blower motor, do not relocate or
alter the PVC tee or coiled flexible tubing
54 lbs/ft² (263.7 kg/m²)
Minimum floor load:
connected to the blower. Follow the blower
16" (406 mm)
Water depth:
relocation instructions exactly. Provide access
for servicing the blower.
94 gal (355.8 L)
Water capacity:
Drop-in, 70-1/2" x 40-1/2" (1791 mm x
1029 mm)
Cutout:
Blower: 240 V, 5 A, 50/60 Hz, 300 W
Electrical component
rating:
Variable
Blower speed:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to
.
8-2-2017 02:10
Memoirs
®
6' BubbleMassage
™
Bath
K-1418-G
