STEP
5
STEP
4
Align the glass to level, and lock the wall clip and the
floor clip.
Complete the glass installation of the other side
following the same steps.
-4-
Affix the hinge to the hole on top of the glass,
screws not locked.
Be aware of the direction
of the hinge: The upper
part should be fixed to the
glass.
STEP
6
+1mm
Align the cam with tools to up the hinge to level, then
lock the screws.
Tips:
there are two
holes on the surface
of the cam, the
bigger one and the
smaller one
separately mark the
highest and the
lowest point of the
cam.
STEP
7
1172434-T01-B
