1-1/2" Bath Drain
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI). Outside North America,
this device may be known as a Residual Current Device (RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
240 V, 15 A, 50/60 Hz
Blower:
Technical Information
All product dimensions are nominal.
If relocating the blower motor, do not relocate or
alter the PVC tee or coiled flexible tubing
Three-wall alcove
Installation:
Left
Drain location:
connected to the blower. Follow the blower
relocation instructions exactly. Provide access
for servicing the blower.
45" x 23" (1143 mm x 584 mm)
Basin area, bottom:
54" x 25" (1372 mm x 635 mm)
Basin area, top:
390 lbs (176.9 kg)
Weight:
61 lbs/ft² (297.8 kg/m²)
Minimum floor load:
11-5/8" (295 mm)
Water depth:
52 gal (196.8 L)
Water capacity:
Blower: 240 V, 5 A, 50/60 Hz
Electrical component
rating:
Variable
Blower speed:
2" (51 mm)
Minimum flat for door:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to
.
9-7-2019 13:32 - US/CA
Memoirs
®
5' BubbleMassage
™
Bath
K-723-G0
