3
1367821-W2-A
For best results, keep the following in mind when caring for your Mira product:
• Always test your cleaning solution on an inconspicuous area before
applying to the entire surface.
• Wipe surfaces clean and rinse completely with water immediately after
applying cleaner. Rinse and dry any overspray that lands on nearby
surfaces.
• DO NOT
allow cleaners to soak on surfaces.
• Use a soft, dampened sponge or cloth. Never use an abrasive material
such as a brush or scouring pad to clean surfaces.
• Be careful not to leave staining materials in contact with the surface for
extended periods of time.
• The ideal cleaning technique is to rinse thoroughly and blot dry any water
from the surface after each use.
User Maintenance
• Warning!
Appropriate safety apparel eg. gloves and safety footwear
must be worn.
• Make sure that the bath is installed by a competent installer.
•
Shut off the main water supply.
• Observe all local plumbing and building codes.
• Check for transit damage and report any faults immediately to your
supplier. No claims for the above will be considered after installation.
•
Carefully remove all of the clear protective film from the bath for inspection.
• Caution!
Additional protective coverings such as a dust sheet should
then be used to protect the bath from damage from falling objects.
• Fitting this product is acceptance of quality.
• We guarantee this product against any defect in materials or workmanship
for a period of 10 years from the date of purchase.
Before You Begin
