NOTES
·
·
·
·
·
·
·
·
·
·
Observe all local plumbing and building codes.
Shut off the water supply.
Seat post holes are on 155mm (6-1/8") centers.
Passageways is 60mm (2-3/8").
Water depth from rim is 245mm (9-5/8")
Ensure that the new drain and shut-off valve have the
correct roughing-in dimensions.
.
Be very careful while working with vitreous china products.
Vitreous china can break or chip if the bolts or nuts are
overtightened, or if carelessly handled.
Carefully inspect the new fixture for any sign of damage.
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards (A112.19.2-2013).
The product complies with GB 6952-2015.
See Fig.#1
·
·
·
·
·
·
·
·
·
·
155mm(6-1/8")
60mm(2-3/8")
245mm(9-5/8")
1
ASME
(A112.19.2-
2013)
GB 6952-2015
TOOLS AND MATERIALS REQUIRED
(Not supplied)
·
·
·
·
·
·
·
·
·
·
·
254mm adjustable wrench
Metal file (file cut)
Tape measure
Tubing cutter
Level
Hacksaw
Putty knife
Screwdriver
Straight pipe coupling
Connection packing
Toilet supply shut-off valve, 10mm (3/8") recommended
The fill valve
nut has been factory-tightened, wrench tighten 1/4 turn
past finger tight.
If no shut-off valve exists, install a shut-off valve
below the tank before installing the new toilet.
Flexible hose are recommended to connect the supply line to
the fill valve. If you use a rigid connection, take care not to
apply side forces to the bottom of the fill valve.
WARNING: Risk of external leakage.
NOTICE:
·
·
·
·
·
·
·
·
·
·
·
254mm
10mm(3/8")
1/4
-2-
1037406-T01-N
