background image

23.

Warranty does not cover pre delivery service and ad-

justment, or failure that may occur as a result of lack 

of/ incorrect pre delivery service and adjustment.

Warranty does not cover any incidental, indirect or 

consequential loss, damage or expense that may 

result from any defect, failure or malfunction of a 

product.

Should any issue be found to be a combination of a 

warranty failure and a non-warranty issue, the repair 

cost component to rectify and repair the non-war-

ranty failure is the customers’ full responsibility.

Warranty

As part of an on-going commitment to excellence in 

product support, 

Powerblast 

offers a 

comprehensive product warranty program.

In order to qualify for full warranty support, your 

product must be registered.

Product not registered with 

Powerblast

 is supported 

by a base 12 month warranty only. Spare parts and 

technical support will not be available for an unreg-

istered product outside of this base warranty period.

If a 

Powerblast 

dealer has not already registered 

your product, please register it online at 

www.

powerblast.com.au 

Under ‘Contact Us’ link. To 

request a physical registration form, please contact 

Powerblast

 customer service on 

1800 812 223.

Registered warranty period for the PS3395: 

Kohler 3000 series engine covered by 24 month 

Kohler warranty 

Warranty covers failure caused by manufacturing 

and material defects in the product, during the war-

ranty period specified. The warranty period begins 

when the product is purchased by the end user. 

War-ranty is not transferrable and is only claimable 

by the original purchaser.

Warranty covers failure of a product caused by 

defec-tive materials and/or manufacturing for the 

period given and the usage specified by 

Powerblast

.  

The war-ranty period begins when the 

product 

i

s purchased by the end user. Warranty is 

not transferrable and is only claimable by the 

original purchaser.

Warranty also does not cover failure caused by the 

untimely replacement or service of the above 

wearing parts. Evidence must be provided that the 

prod-uct has been maintained and serviced suitably 

for a claim to be considered under warranty.

7109782 PS3395 EuroQuip Manual.indd   23

4/4/2017   9:44:01 AM

Summary of Contents for Powershot PS3395






























Reviews: