7.
Power Washer Controls and Features
A
B
C
D
E
G
H
K
L
A. High Pressure
Pump:
Increases
pressure of the
water supply.
B. Engine:
Drives the
high pressure pump. (Refer to
the Engine Owner’s Manual
for location and operation of engine controls.)
C. High Pressure Hose:
Carries the
pressurized water from the pump to
the gun and spray wand.
D. Spray Gun:
Connects with spray wand to control
water flow rate, direction and pressure.
E. Quick-Connect Spray Wand:
Allows the user to
quickly change out high pressure nozzles. (Refer to
How To Use Spray Wand instructions in Operation
section.)
F. Detergent Siphon Hose (not shown):
Feeds
cleaning agents into the pump to mix with the water.
(See How To Apply Chemicals/Cleaning Solvents
instructions in Operation section.)
G. Handle
H. Frame
I. Pump Outlet
J. Pump Inlet
K. Quick Connect Nozzles
L. Nozzle Holder
NOTE:
Photographs and line drawings used in this
manual are for reference only and do not
represent a specific model.
Compare the
illustrations
with your unit
to familiarize yourself
with the location of various
controls and adjustments.
Save this manual for future
reference.
Basic Elements of an Engine
Refer to the Engine Owner’s Manual for location and
operation of engine controls.
Choke Control:
Opens and closes carburetor choke
valve.
Starter Grip:
Pulling starter grip operates recoil
starter to crank engine.
Engine Switch:
Enables and disables ignition
system.
7109782 PS3395 EuroQuip Manual.indd 7
4/4/2017 9:43:59 AM
