TS_622_02 PowerWAVE 9500DPA User Manual 26/2/19
33
:
4.2.2 Local transportation
When you transport the UPS equipment after it has been off-loaded please observe the following precautions.
4.2.3 Storage
If you plan to store the UPS prior to its installation it should be kept (preferably in its shipping packaging) in a clean, dry
environment with a temperature between -25°C to +70°C and RH <90%. If the storage period is likely to exceed seven
days the packaging should be removed and the UPS inspected for shipping damage before it is placed into storage. If
there is no apparent damage you should refit the packaging or cover the UPS with a dust-cover to prevent the ingress of
dust and dirt.
4.3
Unpacking the equipment
If the shipment is received in good order (i.e. the ‘tip & tell’ “FRAGILE” and “ARROW” indicators on the packing container
are intact) then unpack the UPS as follows:
Figure 4.1 UPS Cabinet packaging
CAUTION:
Local transportation:
• When moving the UPS cabinet using a forklift or pallet jack, insert the lifting equipment forks into the
front and rear shipping brackets to lift the cabinet securely and prevent it from toppling over.
• Do not at any time tilt the cabinet by more than 10° from vertical.
WARNING:
Potential dangers:
• If the equipment cabinet is tilted by more than 10° it could cause internal damage. If tilting occurs do not
connect the UPS to the mains electrical supply.
• The weight cabinet can cause serious personal injury and/or structural damage to the surrounding area
if dropped in transit. Always take extreme care when moving the equipment.
WARNING:
The UPS cabinet, battery cabinet and battery packages are heavy and may tip during unpacking
unless the unpacking instructions are not followed closely.
