Product Information
Applicable product:
Bath whirlpool with Massage Experience
K-1110-M
Fixture:*
Bathing well:
Basin area, bottom
42
″
(106.7 cm) x 25-1/2
″
(64.8 cm)
Basin area, top
63
″
(160 cm) x 31-1/2
″
(80 cm)
To overflow:
Water depth to rim
19-1/4
″
(48.9 cm)
Capacity
96 gal (363.4 L)
Weight
160 lbs (72.6 kg)
* Approximate measurements for comparison only.
Included component:
Cut-out template
1016369-7
Pump
Heater
V
Hz
A
1.5 kW
240
50/60
15
Required accessory:
Clearflo horizontal overflow bath drain
K-7273
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current
Device (RCD):
Pump/control
208-240 V, 20 A, 50/60 Hz
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of 43
lbs/square foot (209 kg/square meter) loading.
Pump/piping protrudes beyond rim (see above).
Hot water supply should be 70% of capacity or greater.
Installations will vary.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions are
nominal.
72" (182.9 cm)
6" (15.2 cm)
7/16" (1.1 cm)
1-1/2" OD
Note:
Pump/Piping Protrudes Beyond Rim
No change in measurements
with drain shown. (K-7273)
46"
(116.8 cm)
2-3/4" (7 cm) Max
Pump/Control Access
34" (86.4 cm) W x
15" (38.1 cm) H Min
23-3/16"
(58.9 cm)
22"
(55.9 cm)
1-3/16"
(3 cm)
1-3/8"
(3.5 cm)
23"
(58.4 cm)
3-15/16"
(10 cm)
12-3/16"
(31 cm)
6-3/8"
(16.2 cm)
1023252-1-C
2
Kohler Co.
