Copyright
1995 Kohler Co.
114014-2-
AA
(9537)
REVIVAL
5’
CAST IRON BATH
K-873
1. BEFORE YOU BEGIN
A. INTRODUCTION
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your partic-
ular installation. This will help you avoid costly mistakes.
In addition to proper installation, read all operating and
safety instructions.
All information in this manual is based upon the latest
product information available at the time of publication.
Kohler Co. reserves the right to make changes in prod-
uct characteristics, packaging, or availability at any
time without notice.
These instructions contain important care and cleaning
information – please leave these instructions for the
consumer.
2. PRODUCT REQUIREMENTS
A. SUMMARY OF KEY REQUIREMENTS
Observe all local plumbing and building codes.
Install the unit level with the subfloor.
Provide properly-dimensioned framing.
Make sure the drain location corresponds to the
bath outlet.
Before you begin any work, carefully uncrate and in-
spect the new bath for any damage. Enameled cast
iron may chip; make sure there is no damage to the
new bath. If there is a problem, do not install the bath
– report the problem to the dealer immediately.
B. PRODUCT INSPECTION
Carefully uncrate and inspect the bath for damage.
