background image

7

116627-2-

AC

Kohler Co., Kohler, WI

IMPORTANT CONSUMER INFORMATION

CONSUMER RESPONSIBILITIES

Clean the outside of your vitreous china toilet with mild
soap and warm water. Wipe the entire surface completely
dry with a clean, soft cloth.

If the surface of your vitreous china toilet becomes
excessively dirty, you can use a general purpose cleaner
such as: Fantastik

, Lysol

 Foaming Disinfectant, Dow

Bathroom Cleaner Liquid, Scrub Free

 Soap Scum

Remover, Soft Scrub

, Spic and Span, or Mr. Clean

.

If you live in a hard water area, make certain all the fixture
rim holes are kept clean to ensure proper operation.

Most toilet bowl cleaners are not harmful to the vitreous
china surface of the toilet bowl. Please follow the bowl
cleaner manufacturer’s instructions carefully.

Do not use abrasive cleansers or solvents.

WARNING: Do not use in-tank cleaners.
Products containing chlorine (calcium hypochlorite)
can seriously damage fittings in the tank. This
damage can cause leakage and property damage.

Kohler Company shall not be responsible or liable for any
tank fitting damage caused by the use of cleaners
containing chlorine (calcium hypochlorite).

REQUESTING SERVICE

Please take a moment to familiarize yourself with the
Kohler Warranty, its benefits, and limitations. Kohler Co.
and its distributors support you with one of the largest
Service Networks of its type. Here’s what you need to do
if you require service:

FIRST:

Contact the dealer or contractor who sold and
installed the product. They should be able to
solve any problems you may have.

SECOND: If your dealer or contractor cannot solve the

problem, they will contact or supply you with
the name of the local Kohler Distributor and
the:

KOHLER TECHNICAL SPECIALIST

THIRD:

If you are unable to obtain warranty service
through either your contractor or Kohler Co.
distributor, please write us directly at Kohler
Co., Attn: Customer Service Department, 444
Highland Drive, Kohler, WI 53044 USA, or by
calling  1-800-4-KOHLER from within the
USA.

FOURTH: Include all pertinent information regarding

your claim, including a complete description of
the product, model numbers, colors, finishes,
and the date the product was installed.
Include a description of the problem, and a
photocopy of your invoice for the products
involved. Also give us the name of the
contractor and distributor.

LIMITED ONE-YEAR WARRANTY

Kohler plumbing fixtures and fittings are warranted free of
manufacturing defects.

Kohler Co. will, at its election, repair, replace, or make
appropriate adjustment where Kohler Co. inspection
discloses any such defects occurring in normal usage
within one year after installation. Kohler Co. is not
responsible for installation or removal costs.

To obtain warranty service, contact Kohler Co. either
through your Dealer or Plumbing Contractor, or by writing
Kohler Co., Attn: Customer Service Department, 444
Highland Drive, Kohler, WI 53044 USA, or by calling
1-800-4-KOHLER from within the USA.

Implied warranties, including that of merchantability
and fitness for a particular purpose, are expressly
limited in duration to the duration of this warranty.
Kohler Co. disclaims any liability for special,
incidental, or consequential damages.

Some states do not allow limitations on how long an
implied warranty lasts or the exclusion or limitation of
special, incidental, or consequential damages, so these
limitations and exclusions may not apply to you. This
warranty gives you specific legal rights. You may also
have other rights which vary from state to state.

This limited warranty provides specific legal rights as they
apply within the USA, and other rights may be available,
but may vary from country to country.

This is our exclusive written warranty.

KOHLER CO., KOHLER, WISCONSIN 53044

Summary of Contents for REVIVAL









Reviews: