5. Install the Bath with a Drain Elbow
NOTICE:
To avoid damaging the finish of the bath, lay a drop cloth or other protective liner in the bath
before proceeding.
NOTE:
For installations with a drain pipe, go to the
″
Install the Bath with a Drain Pipe
″
section.
NOTE:
The friction washer, mack washer, and locknut are not required when installing to a drain elbow.
NOTE:
Do not use plumbers putty.
With help, carefully tilt the bath on its back.
Apply construction adhesive to each of the bath feet and around the bottom edge of the shroud.
With help, set bath into the installation location over the drain elbow.
Apply a bead of 100% silicone sealant to the drain hole.
Slide the gasket onto the drain body.
Thread the drain body into the drain elbow.
Drain Body
Gasket
Drain Elbow
Sterling
7
1396992-2-A
