11. Secure the Whirlpool - Alcove Installations
NOTE:
The whirlpool should be secured using the metal attachment clips (provided).
Refer to the
″
Roughing-In
″
section for recommended clip locations.
Verify the studs are within 1/8
″
(3 mm) of the whirlpool at the recommended clip locations. Shim if
necessary.
Slide the bottom of each clip into the space between the whirlpool flange and stud until the tab
touches the whirlpool.
Secure the attachment clips with galvanized or plated flathead screws.
Subfloor
8-3/4" (222 mm) for series 7626, 7627 and 7628
11-3/4" (298 mm) for series 7630 and 7631
5-1/4" (133 mm) for series 7626, 7627 and 7628
5-15/16" (151 mm) for series 7630 and 7631
Attachment Clip
Ledger Strip
Stud Wall
Attachment Clip
Ø 2" (51 mm)
Drain
18-3/4"
(476 mm) 3/16"
(5 mm)
Flange
Ø 2-1/2" (64 mm) Overflow
17" (42 mm)
Overflow Height
Tab
Sterling
15
1105582-2-F
