2-5/8" (67 mm)
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 Hz
Blower:
Technical Information
All product dimensions are nominal.
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
Drop-in
Installation:
End
Drain location:
Remote blower installation kit is available for
relocating the blower. Provide access for servicing
the blower.
43" x 21-9/16" (1092 mm x 548 mm)
Basin area, bottom:
53-1/2" x 32-1/8" (1359 mm x 816 mm)
Basin area, top:
Kit is required for under-mount installations (sold
separately).
110 lbs (49.9 kg)
Weight:
35 lbs/ft² (170.9 kg/m²)
Minimum floor load:
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
15" (381 mm)
Water depth:
57 gal (215.8 L)
Water capacity:
Drop-in, 1042556-7, required, included
Template:
Blower: 120 V, 10 A, 60 Hz
Electrical component
rating:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to
.
9-28-2018 08:36
Sunward
®
5' BubbleMassage
™
Bath
K-1162-G
