114503-2-
CA
(-)
2
Kohler Co., Kohler, WI
ROUGHING-IN
Fig. #1
116
1”
A
5-1/4”
14”
14-1/2”
28”
8”
5-1/8”
19-5/8”
3/8” I.P.S. SUPPLY
C
L OF OUTLET
FRONT OF BOWL
B
C
9-5/8”
A
B
C
K-3432 28-3/4”
14”
6-1/8”
K-3438
31”
16”
5-5/8”
BASE
INSTALLATION
TO REMOVE EXISTING TOILET
Turn off the water supply. Flush the toilet, and use a
sponge to remove the remaining water from the tank and
bowl. Disconnect the supply shut-off valve (if present),
and remove the old tank and bowl.
Remove the old gasket from the floor and closet flange
with a putty knife. Remove and discard the old T-bolts.
NOTICE: If the new toilet is not installed immediately,
temporarily stuff a rag into the closet flange.
Fig. #2
Closet Flange
