AVV-711 Quick Book
104
W ORKFLOW OF THE CONFIGURATION
Enter number of points(positions) by press
and edit value in textbox (the value should be in range 2-
300). If measured points evenly positioned(equal distances used) press
to make checkbox checked
Press
and enter distance then. If distances not equal use
to select point and press
then
enter distance from this to next position. Repeat for each points except last.
Next step setup parameters (if any). Press
parameters screen appears.
To change of use manual input press
, to change of use manual angle
press
NOTE: manual angle input should always be used for vertical shafts.
To change display units between metrical and inches press
.
For using averaging press
enter averaging samples number and press
Press
to save and exit.
SCREEN OVERVIEW
Distance
between
1 and 2
Distance
between
2 and 3
(selected)
Transmitter
laser beam
direction
Number of
points
Selected
distance
Selected point
no.
