AVV-711 Quick Book
109
17. SPINDLE PROGRAM
For spindle alignment mount transmitter(S-Unit by default) in the spindle, the detector(M-Unit by default)
is placed on the part of the machine that can be moved along the working area of machine. To start
spindle program select “Spindle” menu item from main menu and press
17.1 MAIN SCREEN OF THE PROGRAM
Cautions in this screen
Shortcuts in this screen
Required dimension should be properly
entered(but you can edit it later if need,
measure data will not affected)
To start new task or repeat alignment(all
data will be lost)
Tasks in this screen
To enter number of points(positions) to
measure
·
Enter
dimension
·
Start
measurement
·
View results(available when all
measurements taken)
·
Save
file
To enter distance between near and far
position of the detector
To save to file, see
BASIC WORKFLOW
Mark two positions (near and far) on the machine part that can be moved
along machine working area.
Enter dimension between near and far position.
Mount transmitter on the spindle, mount detector on magnet base. Perform
rough laser beam alignment if necessary.
Press
to go to mesure
