AVV-711 Quick Book
74
13.3 VIEW AND SAVE RESULT
When measurements completed for all planes press
for result.
There are two reference line modes. Press
to switch between them.
Ref.points
mode: when any of the reference points undefined result is the unchanged detector value
when two reference points defined result is the difference between calculated reference line and the
detector value;
To define reference points press
then enter reference point 1 number and reference point 2 number
respectively. Press
for store number. To clear reference point enter decimal point
as value
Best fit
mode : In the best fit mode result is the difference between calculated best fit reference line and
the detector value.
The result can be viewed as the table or as graph. Press
to change view.
For save result to file press
. See
Table view
Graph view
Press
to exit to main screen or press
to begin live move
Calculated planes
number
save result to
file
repeat measurement
Reference points no.
X-axis result
value
Y-axis result
value
Red means
tolerance
violation
Yellow means
tolerance
violation
