AVV-711 Quick Book
86
15. FLAT NESS PROGRAM
SHORT EXPLANATION
Flatness program is used for measurement of the plane flatness relative to reference plane formed by
laser beam. The measurement points may be in the plane of circular or rectangular shape with regular or
variable grid step. The plane may contain cutouts. Up to 1600 measurement points can be handled. The
measurement values can be treated as absolute, recalculated to best fit plane or three points can be set
as reference plane.
Procedure: Plan the measurement and mark the points where the detector will be placed. Level the laser
within 0.5 mm [20 mils] in both X- and Y-direction. Start the Flatness program. Use S or M unit as
detector.
The detector unit should be installed with the label on top
To start program select “Flatness” from main menu and press
Main screen of the program appears.
15.1 MAIN SCREEN OF THE PROGRAM
For convenience you can use shortcuts to menu items see table below
Cautions in this screen
Shortcuts in this screen
Tasks in this screen
To resume task
·
Create new grid(rectangular or circular)
·
Change
parameters
·
Resume you work
·
Load saved file
To resume collect
To load saved file
To create new rectangle grid
