AVV-711 Quick Book
106
SCREEN OVERVIEW
For take (store) or replace measure use
key. Use
keys to walk through the points
(measurement positions). Be aware of the currently selected side of the shaft where transmitter placed,
for switch side use
.
Stored
measure no.
Stored point X-
axis result
Current point
no
detector values; ‘-.-
--‘ means data not
ready
Beam position
indicator
means beam out of
target condition
means data not
ready (wait for
some time)
means connection
to transducer not
established
tilt indicator, blue sector
shows allowed position
measures stored
for current point
Stored point Y-
axis result
Tilt value, should be
manually entered once
for each side
Stored measure tilt
indicator
Switch measurement side
of the shaft between 12
o’clock and 6 o’clock
Stored measure values
Y, X and tilt respectively
