IK-12 NEXT
- 15 -
CAUTION
Strictly observe the following to prevent fire, explosion, or burst.
■
Spatters and hot base metal right after welding can cause tire.
■
Imperfect connection of cables or imperfect contact on the route of the electric
current on the steel bar and other base metal can cause fire because of
heating due to resistance.
■
Arcs generated on the container of gasoline or other inflammables can cause
explosion.
■
welding of sealed tanks or pipes can cause bursts.
■
Do not do welding in a place where scattered spatters will be in contact with
inflammables.
■
Do not do welding in a place near inflammable gas.
■
Do not bring hot base metal right after welding close to inflammables.
■
Welding on ceilings, floors, an walls may cause fire on the hidden side. Remove
inflammables from the hidden side.
■
Firmly tighten cable connections, and firmly connect the welding cable on the
base metal side at a location as close as possible to the base metal.
■
Do not weld gas pipes filled with gas.
■
Do not weld sealed tanks or pipes.
■
Provide a fire extinguisher near the welding place to prepare for the worst.
■
Do not weld a container that has inflammables inside.
■
Do not have a lighter, matches, or other inflammables with you during welding.
