IK-12 NEXT
- 25 -
4.2.2 About the multi-function selector switch
With IK-12 NEXT, various operations can be set by selecting individual modes and parameters
with the multi-function selector switch.
The individual modes and parameters are as follows.
Operation
Panel
Indication
Digital Display
Setting Range
Default Value
40
~
300 mm/min
100mm/min
1.574
~
11.811 inch/min
3.937 inch/min
Function
CREEP travel speed setting
Select this mode to change
the speed during CREEP travel
The carriage travels at the speed set in the CREEP travel mode only
when the CREEP button is pressed while the carriage is traveling or
when this mode has been selected with the multi-function selector
switch
The value for the CREEP travel speed is displayed while the carriage
is stopped and while it is traveling.
The travel speed of the carriage can be changed by turning the
volume switch while the carriage is stopped and while it is traveling.
To increase the speed, turn it clockwise, and to decrease the speed
turn it counterclockwise.
Operation
Panel
Indication
Digital Display
Setting Range
Default Value
40
~
2400 mm/min
40mm/min
1.574
~
94.488 inch/min
1.575 inch/min
Function
Travel mode (1)
Select this mode to make the carriage
travel.
When the direction selection switch is flipped while this mode is
selected, the carriage will start traveling in the direction of the arrow.
Selecting this mode while the carriage is traveling causes the travel
speed of the carriage to change to the set speed.
The value for the carriage travel speed is displayed while the carriage
is stopped and while it is traveling.
The travel speed of the carriage can be changed by turning the
volume switch while the carriage is stopped and while it is traveling.
To increase the speed, turn it clockwise, and to decrease the speed
turn it counterclockwise.