1
Handling and Safety Precautions
These precautions should be strictly observed in order to ensure safe, long-term
use of the product.
In particular, the following precautions should be carefully observed:
・Use glycerin as a lubricant. Do not use powder, as doing so may cause the product to malfunction.
・Do not use a solvent of any kind for this product. Doing so may cause the product to malfunction.
・Do not store or use this product in temperatures of 60°C or higher. Doing so may cause the product to
malfunction.
1. The contents of this instruction manual are subject to change without notice.
2. This instruction manual may not be reproduced in part or in its entirety without permission.
3. Please contact the manufacturer in the event that any errors or omissions are found in the contents of
this instruction manual.
4. This product should be used only as described in this instruction manual. In particular, the product
should not be used in any way that contravenes the precautions noted in the instruction manual.
Ignoring the messages displayed with this icon, and handling the product improperly,
may cause bodily injury or property damage.
Make sure the Fetal Head Extractor for Obstetric Models unit does not fall from the table,
etc. it is being used on.
Make sure to never release the handle while cranking it partway through a demonstration. Doing so
may be dangerous due to reverse rotation.
Do not place hands or fingers near the component screw axis, located beneath the fetus support
board’s crank, during operation.
