2
1-2. Please use the Simulated Polyp as early as possible after it has been unsealed. KOKEN is not
responsible for quality of Simulated Polyps that have already been unsealed.
1-3. When taking out the Simulated Polyp, please use clean tweezers etc.
1-4. If a Simulated Polyp has been taken out of the container, please do not put it back in the
container.
1-5. Do not leave a Simulated Polyp (for polypectomy) out of the container for a long period of time.
The surface will become dry and hard, and it will not be possible to use it any longer.
1-6. Always store in the storage liquid. Storing it in other liquids will cause degeneration of the polyp.
Be careful not to spill the storage liquid or throw it away before using all the Simulated Polyps (for
polypectomy).
2. When resecting a Simulated Polyp (for polypectomy), always use a disposable electrode.
3. Be sure that no storage liquid gets in your eyes or mouth.
Maintenance of the model after use.
1. Each time after using this simulator, wash the lubricating jelly inside the gastrointestinal tract
with cold or hot water.
2. Wipe dirt from the black case (excluding the sponge parts) using a soft cloth such as gauze
soaked in water or mild detergent diluted with water.
* Never use solvents like thinners or benzene.
3. When this simulator is exposed to direct sunlight or ultraviolet rays for a prolonged period of
time, it may be deformed or the color may fade. When not in use, attach to its proper place
on the base of the case, put the lid on, and store in a level place without direct sunlight or
ultraviolet rays.
1. The contents of this instruction manual are subject to change without notice.
2. This instruction manual may not be reproduced in part or in its entirety without permission.
3. Please contact us in the event that any errors or omissions are found in the contents of the instruction
manual.
4. This product should be used only as described in this instruction manual. In particular, the product
should not be used in any way that contravenes the precautions noted in the instruction manual.