background image

1

Handling and Safety Precautions

These precautions must be observed strictly to ensure safe long-term 

use of the product.

The following precautions should be strictly observed:

1.   This model is made of special materials with texture similar to human skin. The model must 

be handled carefully in the same manner as handling an actual person. The model may be 
damaged when pulled with force or used in contact with sharp objects.

2.   Do not place any objects directly on the model, and do not place the model breast skin-side 

down. The model may become deformed.

3.   If the skin becomes sticky or after it is wiped to clean, apply baby powder to reduce friction.
4.   Never use organic solvents, such as thinners or benzin. The model will be damaged when 

these solvents are used.

5.   This model may become deformed when stored for a long period at low or high 

temperatures. The materials may be deteriorated, deformed, or discolored when exposed to 
direct sunlight or ultraviolet light. Hence, when storing the model, avoid exposure to direct 
sunlight and ultraviolet light.

6.   Never use oil-based ink, pencils, chalk, and paint on the model. They will soak into the model 

and cannot be erased.

7.   This model can be neither dry-cleaned nor machine-washed. For cleaning, see “5. Instructions 

for Care” on Page 12.

8.   The air pump of the breast bag must be pressed about 8 to 10 times, or 15 times at the 

maximum. Be careful, as the bag may be damaged when it is inflated too much.

9.   Deflate the breast bag before storage. Storage without deflating may cause deformation.
10.  The breast bag may be deformed over the years. Check its function about three years after 

the purchase. If the function is affected by deformation or other changes, consider replacing 
with a new bag.

1.   The contents of this instruction manual are subject to change without notice.
2.  This instruction manual may not be reproduced in part or in its entirety without permission.
3.  Please contact the manufacturer in the event that any errors or omissions are found in the contents of this 

instruction manual.

4.  These products  must be used only as described in this instruction manual. In particular, the products must 

not be used in any way that contravenes the precautions noted in the instruction manual.

Summary of Contents for LM-113















Reviews: