English
14
(4) Install the
fi
lter (
Fig. 9
)
Fit
the
fi
lter over the
fi
lter holder.
(5) Install the pre-
fi
lter (
Fig. 10
)
When installing the pre
fi
lter, press the housing on with the projections in a horizontal
position. Then, turn the pre-
fi
lter until two projections are
fi
xed in the grooves of the
housing.
(6) Install the dust case (
Fig. 11
)
Place the dust case over the housing, making sure that the protruding marks on both
are aligned. Then, turn the dust case clockwise for approximately 120 degrees.
Fig. 10
Push in
Turn to secure
Housing
Grooves
Housing
Groove
Pre Filter
Protrusion
Tighten
fi
rmly
Pre Filter
Projections
Pre Filter
Filter
Hold here
Fig. 11
Align the
protruding
marks
Turn clockwise
for approximately
120 degrees
Housing
Protruding
Marks
* The dust case can also
be installed with the
nozzle facing upwards.
Dust Case
Dust Case
Fig. 9
Filter
Filter Holder
Filter turned up
00Book̲R12DA̲ChS.indb 14
00Book̲R12DA̲ChS.indb 14
2021/05/14 12:07:58
2021/05/14 12:07:58
