VI
Appendix
VI.1
Transport, storage, maintenance, disposal
Transport :
— only by qualified personnel
— only in the manufacturer’s original recyclable packaging
— avoid shocks
— temperature
–25 to +70°C, max. 20°C / hour rate of change
— humidity
max. 95% relative humidity, no condensation
— the servo amplifiers contain electrostatically sensitive components which
can be damaged by incorrect handling
Discharge yourself before touching the servo amplifier. Avoid contact with
highly insulating materials (artificial fabrics, plastic films etc.).
Place the servo amplifier on a conductive surface.
— if the packaging is damaged, check the unit for visible damage.
In this case, inform the shipper and the manufacturer.
Storage :
— only in the manufacturer’s original recyclable packaging
— the servo amplifiers contain electrostatically sensitive components which
can be damaged by incorrect handling
Discharge yourself before touching the servo amplifier. Avoid contact with
highly insulating materials (artificial fabrics, plastic films etc.),
Place the servo amplifier on a conductive surface.
— max. stacking height for SERVOSTAR™600 : 10 cartons
— storage temperature
–25 to +55
o
C, max. 20°C/hr. rate of change
— humidity
relative humidity max. 95%, no condensation
— storage duration
< 1 year without restriction
> 1 year : capacitors must be re-formed before
the servo amplifier is commissioned.
To do this, remove all electrical connections and
supply the servo amplifier for about 30 min. From
230V AC, single-phase, on terminals L1 / L2.
Maintenance :
— the instruments do not require any maintenance
— opening the instruments invalidates the warranty
Cleaning :
— if the casing is dirty : cleaning with Isopropanol or similar
do not immerse or spray
— if there is dirt inside the unit
: to be cleaned by the manufacturer
— dirty protective grill (fan)
: clean with a dry brush
Disposal :
— the servo amplifier can be reduced to its principal components by
unscrewing it (aluminium heat sink and front panel steel housing sections,
electronics boards)
— disposal should be carried out by a certified disposal company.
We can give you suitable addresses.
SERVOSTAR™ 600 Installation-manual
61
Kollmorgen
02.99
Appendix
